Uhlenbrock 73236 decoder with Next18 interface

• Data format DCC / Motorola®
• For direct current and bell armature motors
• With Next18 interface
• Continuous load 750 mA, peak load 1000 mA
• High frequency load regulation
• Direction-dependent, dimmable light outputs
• 6 special function outputs
• Function mapping f0– f12
• SUSI connection via interface
• LISSY connection via interface
• Switchable lighting on the train side
• Protected against short circuit and overload
• Size 15.0 x 9.5 x 2.9 mm

The standard decoder for small gauges is the 73xxx series. These decoders are available with connection cables (73300), 6-pin plug according to NEM 651 (73310) and with PluX12 interface (73340).

This can z. B. can be used to equip Tillig locomotives. The highlight is the 73236 decoder for locomotives with the Next18 interface. This is even equipped with the Intellimatic.

Our new decoders 73406 with connecting cables and 73416 with 6-pin plug according to NEM 651 are intended for the smallest locomotives. They are characterized by their very small size, which achieves high performance. Due to the built-in protection mechanisms, these decoders are extremely robust even in their small size.

All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC brakes and extended function mapping and can be updated on the rails.

The decoders are equipped with a SUSI or microSUSI interface for easy connection of a sound module. With the Next18 decoder, the SUSI connections can be found on the connector strip.

Together with the IntelliSound micro module or IntelliSound compact module, this results in an extremely small decoder-sound combination.

Item No. 73236 ID2 decoder, Next18