Uhlenbrock 73416 Intelli Drive 6-pin Mini Decoder
.png)
The standard decoder for small gauges is the 73105 series. These decoders are available with connection cables (73105), 6-pin plug according to NEM 651 (73115) and with PluX12 interface (73145).
This can z. B. can be used to equip Tillig locomotives. The highlight is the 73235 decoder for locomotives with the Next18 interface. This is even equipped with the Intellimatic.
Our new decoders 73405 with connecting cables and 73415 with 6-pin plug according to NEM 651 are intended for the smallest locomotives. They are characterised by their very small size, which achieves high performance. Due to the built-in protection mechanisms, these decoders are extremely robust even in their small size.
All IntelliDrive 2 decoders have RailComPlus®, Selectrix®, ABC brakes and extended function mapping and can be updated on the rails.
The decoders are equipped with a SUSI or microSUSI interface for easy connection of a sound module. With the Next18 decoder, the SUSI connections can be found on the connector strip.
Together with the IntelliSound micro module or the IntelliSound compact module, this results in an extremely small decoder-sound combination.
Item No. 73416 Mini decoder, microSUSI, Multi, DC, control, cable
-
For gauge N-TT-H0e-H0m-H0
-
For direct current and Faulhaber motors
-
Data formats DCC and Motorola
-
Max. Motor current 1.5 A,
-
light and function outputs 0.4 A
-
continuous load 0.7 A
-
dimmable light outputs
-
With connection option for SUSI or via soldering pads
-
Load regulation
-
Shunting
-
Downward braking delay
-
DC analog operation
-
All outputs are short-circuit protected
-
Size only 9.5 x 7.5 x 2.4 mm
