RLL610TC Toton Fuel Line Store – Maintenance Office – OO Gauge Kit
 

Railway Laser Lines – Laser Cut OO Gauge Toton Fuel Line Store & Maintenance Office – March 2020 – Now with a revised roof detail.

One of the UK’s main depots that still survive today is Toton Traction Maintenance Depot, currently owned under DB Schenker.

Toton has a large fuelling area, with 3 large fuel tanks and a number of outbuildings along side these. Railway Laser Lines are pleased to announce that our first of a range of kits from Toton is the old Fuel Line Store & Maintenance Office that still stands today, albeit there is now a newer reception building next door.

The OO gauge version is first and will be quickly followed by an O gauge version too. The outbuilding only measures around 11cm in length in OO gauge, so won’t take up huge amounts of room. Where this lacks in size, it certainly doesn’t lack in detail and we’ve gone that extra mile with this kit to also include a fully brick interior too. The level of detail that the laser machine can do with bricks is second to none and no plasticard or resin can match. The roof has a strange side outlet that allows the drain pipe to come from and we’ve even added that to our kit and enclosed a brass tube for the downpipe.
The kit could be used for a number of different options on your layout and doesn’t have to be what it was based on.
The kit is made from MDF, laser-card and acetate for the window glass. The kit shouldn’t take more than a couple of evenings work, allowing for parts to dry and what better way to wipe away the dark miserable evenings with a nice session in kit building.

 

Dimensions: L 110mm x W 54mm x H 39 mm

Materials Used; MDF, Acetate, Card

Assembly Required: Yes

Additional Parts Required (Not Included With Kit): Comes as a kit but some parts of the kit will require priming, painting and/or glueing. A sharp craft knife/zippy blade or similar will be required to remove pieces from part of the kit.
Other items required to assist: PVA Glue (or equivalent) Sandpaper, Primer Paint, Acrylic/Enamel Paint, Masking Tape, Paint Brushes

Advise: When priming/painting, do so in a well-ventilated area and use an appropriate mask. Some items are very fragile so handling with care is paramount.

PLEASE NOTE: ALL laser cut kits are made ‘to order’ and current turn around time is 10-14 days, unless we have made any surplus kits, then they will be made readily available. Check below if we have any in stock ready to post out. However, we will always aim to get your kit made as soon as we can.