Don’t want to spend £50+ on a laser cut baseboard just to have a small diorama? Then the RLL-DB-001 Diorama Baseboard cut kit is ideal.
It measures 575mm in length, 375mm in width and has a front and side depth of 100mm, with the addition of a viewable 9 inch backscene to accommodate the smaller versions of the ID Backscenes that are available.
The kit simply glues together, using a stong adhesive/PVA and you can complete this in around 10 minutes, with a few additional minutes to hold it together whilst the glue starts to bond and dry.
It has a nice depth to allow the protection of any objects that you may place underneath, point motor, module etc. The under supports use the castellated style to give that additional strength and rigidity, whilst also having a number of small pre-cut holes under the board to allow the free-flowing of any cables that you use underneath.
NB: These mini diorama baseboards are made from 3mm MDF and therefore should only be used for ‘display’ purposes, i.e , a diorama or if joining multiple ones together, to be fully sat on a flush study base top. These baseboards will make an ideal starter into modelling for later progression up to a larger style baseboard.
Dimensions: L 575mm x W 375mm x H 328 mm
Materials Used; 3mm MDF
Assembly Required: Yes
Additional Parts Required (Not Included With Kit): Comes as a kit but and will require glueing.
Other items required to assist: PVA Glue (or equivalent)
Advise: If priming/painting this item, do so in a well-ventilated area and use an appropriate mask.
****THERE ARE NO INSTRUCTIONS WITH THIS KIT AS IT IS AS SIMPLE AS GLUEING TOGETHER, MAKING SURE THE SUPPORTS UNDERNEATH FACE THE RIGHT WAY AROUND****.
