- To connect a track control panel to digital centers with LocoNet connection
- For connecting 10 buttons and lamps or LEDs
- All inputs and outputs are freely programmable
- Turnout in the address range 1-2048 directly switchable
- Triggering driveways that are stored in the Intellibox or IB-Switch
- Driveway circuit possible by start destination keys
Using the Switch-Control allows you to connect your analog track control panel with a digital center. All digital centers with LocoNet connection like the Intellibox, the DAISY-System, the Twin-Center or Central Digitrax are supported.
Can be connected with series resistors 10 buttons and 10 LED or LEDs to a Switch-Control.
The connected push button switches provide control commands for direct connection of switches and control signals from across the station or checkback messages for initiation of vehicle roads in the IB-Switch. Driveways that are stored in the Intellibox or Twin-Center, can be made by turnout
command be triggered via the turnout addresses 2001-2048. All key inputs can be used as start / destination keys for control of routes to use.
Connected indicator lights can NEN over the keys inputs are switched on and off command of another LocoNet device directly or via switches or feedback.
All key inputs and lamp outputs are freely programmable in its function.Programming the switch control can be carried out directly with the Intellibox software version 1.3. LocoNet command stations without computer connection will need the USB LocoNet interface with the software LocoNet Tool (CODE Nr.63120).To feed the indicator lights, a separate transformer 16 V ~ requires that not talzentrale with digital may be connected, but can be used to power multiple modules.
Incl. 2.15 m LocoNet cable.
||Replacement connector cable
||Transformer 16V ~ / 70VA