T +44(0)1823 429 309
E-mail: info@dcctrainautomation.co.uk
T +44(0)1823 429 309
   E-mail: info@dcctrainautomation.co.uk


  • ESU LokSound V4.0 "Universal sound for reprogramming", with 8-pin NEM652 interface, Gauge: 0, H0

ESU 54400 LokSound V4.0 "Universal sound for reprogramming", with 8-pin NEM652 interface, Gauge: 0, H0

 

Operational modes: NMRA/DCC with 14, 28, 128 drive steps and automatic RailComPlus® detection.
  DCC 2-digit & 4-digit addresses. Up to 28 functions in DCC operation.
  Digital Motorola® (old and new), up to 28 drivesteps in Motorola® mode. Up to 255 addresses in Motorola® mode. Up to 4 addresses for function keys F5 to F15.
  Selectrix® operation with 31 speed steps. Extended functions for up to 8 function keys (suitable control station necessary).
  Analogue DC and AC operation (deactivation possible).
  Automatic recognition of the operating mode and the DCC drive step configuration.
  Supporting Lenz® LG100, Märklin®, Roco® braking modes. Supporting Lenz ABC brakes and Märklin® brake system
  Reverse bit
  Intelligent programming mode with Märklin® 6021®. Supporting programming modes for ROCO Lokmaus 2 and ROCO Multimaus.
Drive control bit: 1.1A continuous load
  Connection to DC-, AC-motors with permanent magnet
  Noiseless, motor saving control with 40 / 20 kHz pwm frequency
  Motor output protected against overload. Load control of the 5th generation (possible to deactivate) Dynamic Drive Control.
Function outputs: 4 amplified outputs on wired versions
  max. 250mA load for each output
  Total current for all function outputs ca. 500mA. Outputs short circuit protected
Sound unit: 8 (!) individual sound channels
  High power stereo amplification with about 1.8 Watts output current
  Soundfiles in the internal flash memory modifiable
  Modes for Steam-, Dieselhydraulic- , Dieselelectric- , Electric locomotives, battery railcars, hybrid locomotives etc.
  32 MBit sound memory (up to 276 seconds)Connection for two independent loudspeakers
Energy buffering: Connecting for ESU 54670 PowerPack available
Communication: Full RailComPlus® integration. Susi interface.
Loudspeakers: Impedance 4-8 Ohms, 4 Ohms recommended. Special speaker 4 Ohms, 23 mm diameter (4 Ohms) included in delivery
Dimensions: 30.3mm x 15.5mm x 5.5mm (1.18 x 0.61 x 0.22 inch)

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

ESU LokSound V4.0 "Universal sound for reprogramming", with 8-pin NEM652 interface, Gauge: 0, H0


  • Brand: ESU
  • Product Code: 54400
  • SKU Code: 54400
  • Reward Points: 1

  •    Availability: Out Of Stock
  • £94.00

  • Ex Tax: £78.33
  • Price in reward points: 1