T +44(0)1823 429 309
E-mail: info@dcctrainautomation.co.uk
T +44(0)1823 429 309
   E-mail: info@dcctrainautomation.co.uk

  • cTelektronik DCX51-P12 -  1A Lokdecoder mit PluX12

DCX51-P12 -  1A Lokdecoder mit PluX12





The locomotive decoder DCX51-P12 is suitable for all AC and DC motors in N-gauge locomotives to H0. The maximum total load may not exceed 1A.

Dim. (LxWxH) 18,6x9,5x (total height with plug 7mm), (overall height without plug 3,6mm)

The DCX51-P12 offers high frequency 16kHz or 32kHz motor control for Faulhaber motors. Alternatively, there are also infinitely adjustable 30-150 Hz for traditional motors.

The DCX51-P12 offers available with 14, 28 or 128 speed levels, load regulation, full address space 1-10240 and the option on the main track to be programmed 'on-the-fly'.

  • Full NMRA-compatible (DCC data format)
  • DCC data format  
  • prepared Duplex Communication (bidi)
  • Braking by unbalanced signal (brakes with diodes)
  • Full "function mapping" as per NMRA-assembly
  • Function outputs separately dimmable
  • Dimming frequency 1.2 kHz  
  • Aut. Decoupling, timing for digital clutch,
  • American lighting effects such as flashing, Fade Out, Flashing alternately, Single Pulse Strobe,
  • Double Strobe, Flashing Headlight, Ditch Light left, Ditch Light beacon right Rotary, Gyralite, Mars
  • Light, soft start (slow glimmer of functions)
  • Full address space 1-10240
  • Shunting, showcases mode, a button-shunting backwards decreased Speed ​​......
  • Evaluation of the chain pulses via F1 or F4
  • Speed ​​table CV67-CV94
  • Optimizable load balancing (P and I controller)
  • High frequency motor control 16kHz or 32kHz
  • Low-frequency motor control of 30 to 150 Hz can be selected
  • Optionally 14, 28 or 128 speed steps
  • 0.8 Amp motor current
  • digital or analog mode
  • 'On the fly' Programming
  • Hard Reset for resetting the CV values ​​to factory settings (CV1 = 0)
  • User CV's to store personal data
  • Separately adjustable braking time with HLU (also intermediates)
  • Signal controlled speed influence (HLU Zimo, switchable)
  • Number recognition (Zimo, switchable)
  • Fully programmable with Lokmaus (also values ​​and CVs to 255)
  • Reliable overload protection (motor and auxiliary outputs are protected against overcurrent)
  • 2 CVs groups freely selectable (eg. For club and private applications)
  • Standard version: 4 additional functions enhanced short circuit protection,
  • Solder pads for decoders minus and plus of rectifier (connecting storage capacitor)

The DCX51-P12 is fully NMRA compatible and in all systems that use the NMRA DCC data format, applicable (eg Digitrax, Lenz, LGB, Uhlenbrock, Zimo, Roco 'digital is cool', etc.)



  • ONLY 18,6x9,5x3,6 mm

Write a review

Note: HTML is not translated!
    Bad           Good

cTelektronik DCX51-P12 - 1A Lokdecoder mit PluX12

  • Brand: cT Electronik
  • Product Code: DCX51-P12
  • SKU Code: DCX51-P12
  • Reward Points: 1

  •    Availability: 1
  • £29.50

  • Ex Tax: £24.58
  • Price in reward points: 1