T +44(0)1823 429 309
E-mail: info@dcctrainautomation.co.uk
T +44(0)1823 429 309
   E-mail: info@dcctrainautomation.co.uk

  • cT Electronic DCX76 Micro Decoder 4 enhanced Functions

cT Electronic DCX76 Micro Decoder 4 enhanced Functions

DCX76 reinforced with 4 functions

0.8 A Micro decoder, 4 enhanced functions (10.8 x 7.1 x 1.3 mm) LxWxH

The decoder DCX76 suitable for all DC and AC motors in the Z-track to H0 locomotives. Maximum load must not exceed 0.8 A.

The pipsqueak acts in the hand is much smaller than you can imagine on the dimensions themselves.

The high frequency 16kHz or 32kHz DCX76 provides motor control for Faulhaber motors. Alternatively, there are also continuously variable 30-150 Hz for traditional motors.

The DCX76 offers either 14, 28 or 128 speed, load balancing control, full address space of 1 to 10240 and the option on the main track 'on the fly' to program.

Full NMRA-compatible (DCC data format)
DCC data format

Full "function mapping" NMRA-arrangement

Function outputs separated dimmable

Dimming frequency 1.2 kHz

Uncouple timing digital coupling

American lighting effects such as blinking, dimming, Flashing alternately, Single Pulse Strobe, Double Strobe, Flashing Headlight, Ditch Light left, Ditch Light right Rotary beacon, Gyralite, Mars light, soft start (slow glimmer of functions)

Full address space 1-10240

Shunting, display mode, a button-shunting reduced, backward speed .....

Evaluation of the chain pulses via F1 or F4

Individual speed table CV67-CV94

Optimizable load balancing (P and I controller)

High-frequency motor control 16kHz or 32kHz

Low-frequency motor control of 30 to 150 Hz selectable

Optional 14, 28 or 128 speed steps

0.8 amp motor power

digital or analog operation

'On the fly' programming

Hard Reset on to reset the factory settings CV values

User CV's to store personal data

Separately adjustable braking time with HLU (including intermediates)

Signal controlled speed influence (Zimo HLU, disabled)

Loco number (Zimo, disabled)

Brakes with asymmetric signal (diodes ratio 1:4)

Fully programmable with Lokmaus

Reliable overload protection (motor and auxiliary outputs are protected against overcurrent)

2 CVs groups freely selectable (for own or third-party applications)

The DCX76 is fully NMRA compatible and for all systems that use the NMRA data format used (eg Digitrax, Lenz, LGB, Uhlenbrock, Zimo, Roco 'digital is cool', etc.)

Write a review

Note: HTML is not translated!
    Bad           Good

cT Electronic DCX76 Micro Decoder 4 enhanced Functions

  • Brand: cT Electronik
  • Product Code: DCX76
  • SKU Code: DCX76
  • Reward Points: 1

  •    Availability: Out Of Stock
  • £29.95

  • Ex Tax: £24.96
  • Price in reward points: 1