LUX-Modellbau 9320 HOm Wheel Cleaner
This unit is designed to be fitted in to your layout. As your trains run over the unit it will clean all wheels of the loco and the rolling stock. Mostly used to clean the loco wheels but if you don't also keep wagons clean then this is just adding to your problem of keeping track clean.
This unit is for HOm track.
You can use either digital or analogue power to drive the locos deepening on your needs. There is a motor in the unit that need a DC 0-12 volt power supply to power this. If you wish to drive this motor from your digital system you can add a simple loco decoder. Then you would be able to control the speed of the cleaning pads under the loco wheels.
Technical specifications:
- The wheel cleaning system was designed taking into account the standards of European model railways.
- Power supply 0-12 volts (DC)
- Power supply digital multi-protocol decoder (Motorola DCC Selectrix format)
- Current consumption approx. 100 mA
- Maximum motor voltage on the cleaning drive 12 volts DC
Measurements:
| Cleaning Length (Table & Built-in Device | 183mm |
| Length | Width | Height |
| Installation Dimensions (Built-in Device) | 300mm | 40mm | 50mm |
| External Dimensions (Table Top Device) | 900mm | 70mm | 62mm |
