T +44(0)1823 429 309
E-mail: info@dcctrainautomation.co.uk
T +44(0)1823 429 309
   E-mail: info@dcctrainautomation.co.uk




ECoSDetector feedback modules

ECoSDetector feedback modules


ECoSDetector - Feedback modules

Our ECoS Detector feedback modules should be used to automate train operations. Beside the usual track occupancy detection, the train specific identification number can be read. It also enables the implementation of an external track control board.

Technical data - ECoSDetector feedback modules

 ECoSDetector
Operational modes:Direct bus connection to ECoSlink. Operation with ECoS or Central Station Reloaded V3.0.0. is possible.
Feedback section:16 feedback modules.
 Configurable by using jumpers as digital inputs (e.g. for contact tracks or reed switches) or as track occupancy detectors (current sensor).
 Galvanical isolation of feedback modules and command station
 Max. 3A current load per feedback input
RailCom®:4 of 16 feedback sections can be used as RailCom feedback sections ("local detector"), if desired. Recognition of loco address
Dimensions:86mm x 86mm x 25mm (3.39 x 3.39 x 0.98 inch)
Included in delivery:ECoSDetector feedback module, terminals, ECoSlink bus connection cable, extensive instruction manual
  
 ECoSDetector Standard
Operational modes:Directly connected to ECoSlink bus. Operation with ECoS command station and Central Station Reloaded V3.0.0 possible.
Feedback section:16 feedback modules as digital inputs (e.g. for contact tracks or reed switches). Galvanical isolation of feedback modules and command station.
Dimensions:86mm x 86mm x 25mm (3.39 x 3.39 x 0.98 inch)
Included in delivery:ECoSDetector Standard feedback module, terminals, ECoSlink bus connection cable, extensive instruction manual
  
 ECoSDetector RC
Operational modes:Directly connected to ECoSlink bus. Operation with ECoS command station and Central Station Reloaded V3.0.0 possible.
Feedback section:4 feedback inputs configured as track occupancy detectors (current sensor). Galvanical isolation of feedback modules and command station.
RailCom®:4 feedback sections can be used as RailCom feedback sections ("local detector"). Recognition of loco address
Dimensions:86mm x 86mm x 25mm (3.39 x 3.39 x 0.98 inch)
Included in delivery:ECoSDetector RC feedback module, terminals, ECoSlink bus connection cable, extensive instruction manual
  
 ECoSDetector Extension
Operational modes:Extension module for ECoSDector, is powered and controlled by it. Transistor outputs are powered externally.
Outputs:32 transistor outputs, 100mA output load each. Construction as „open collector“ is connected to ground
 Total current of all outputs is max. 1.5A
Dimensions:86mm x 86mm x 25mm (3.39 x 3.39 x 0.98 inch)
Included in delivery:ECoSDetector Extension module, terminals, extensive instruction manual








ECoSDetector 50094...

ECoSDetector 50094...



Our ECoSDetector feedback modules should be used to automate train operations. Beside the usua..

£192.00 Ex Tax: £160.00

ECoSDetector RailCom...

ECoSDetector RailCom...



Train number detection The new ECoSDetector RC can monitor its 4 track sectors in a spe..

£96.00 Ex Tax: £80.00

ECoSDetector Standard...

ECoSDetector Standard...



The ECoSDetector Standard is made for all model railroaders who look for a reliable and affordable f..

£75.00 Ex Tax: £62.50

ESU 50095 ECoS Detector Extension...

ESU 50095 ECoS Detector Extension...



If required, each ECoSDetector can be supplemented by a ECoSDetector Extension module, whi..

£48.00 Ex Tax: £40.00

Showing 1 to 4 of 4 (1 Pages)